mirror of https://github.com/nirenjan/libx52.git
148 lines
3.8 KiB
Groff
148 lines
3.8 KiB
Groff
.TH X52CLI 1 2015-12-09 X52Pro-Linux "User Commands"
|
|
.SH NAME
|
|
x52cli \- Command line frontend to libx52
|
|
|
|
.SH SYNOPSIS
|
|
.B x52cli
|
|
<\fIcommands\fR> [\fIcommand-options\fR]
|
|
|
|
.SH DESCRIPTION
|
|
.BR x52cli
|
|
is a command line frontend to the X52 library that allows you to set the LEDs
|
|
and different parameters on the multi-function display.
|
|
|
|
Running
|
|
.BR x52cli
|
|
without any arguments will display a brief help message.
|
|
|
|
.SH COMMANDS
|
|
Commands are not case sensitive.
|
|
|
|
.IP "\fBbri\fR {\fBmfd\fR | \fBled\fR} <\fIbrightness\fR>"
|
|
Set the brightness of the \fBmfd\fR or \fBled\fRs. \fIbrightness\fR can be any
|
|
numeric value between 0 and 128. Higher values are accepted, but may not have
|
|
the desired effect.
|
|
|
|
.IP "\fBmfd\fR <\fIline\fR> <\fItext\fR>"
|
|
Set the text on the MFD \fIline\fR. \fIline\fR can be 0, 1 or 2, and refers to
|
|
the first, second or third line of the multi-function display respectively.
|
|
\fItext\fR cannot have embedded NUL characters (0x00) and must correspond
|
|
with the character map of the MFD. \fItext\fR should be quoted in order to
|
|
preserve embedded whitespace. To pass raw hex values, use
|
|
.BR printf (1)
|
|
as shown in the examples section. Note that \fItext\fR is limited to a length
|
|
of 16 characters. While you can pass longer strings, they will be truncated.
|
|
|
|
.IP "\fBled\fR <\fIled-id\fR> <\fIstate\fR>"
|
|
Set the LED \fIled-id\fR to \fIstate\fR.
|
|
|
|
.IP "\fBblink\fR {\fBon\fR | \fBoff\fR}"
|
|
Turn the \fBblink\fR state \fBon\fR or \fBoff\fR.
|
|
|
|
.IP "\fBshift\fR {\fBon\fR | \fBoff\fR}"
|
|
Turn the \fBshift\fR indicator in the multi-function display \fBon\fR or
|
|
\fBoff\fR.
|
|
|
|
.IP "\fBclock\fR {\fBlocal\fR | \fBgmt\fR} {\fB12hr\fR | \fB24hr\fB} {\fBddmmyy\fR | \fBmmddyy\fR | \fByymmdd\fR}"
|
|
Set the clock 1 display to the current time and date in either the \fBlocal\fR
|
|
timezone, or in \fBgmt\fR timezone. Clock can be configured to display in either
|
|
\fB12hr\fB or \fB24hr\fR mode. Date can be displayed in one of the following
|
|
formats: \fBddmmyy\fR, \fBmmddyy\fR, or \fByymmdd\fR.
|
|
|
|
.IP "\fBoffset\fR" {\fB2\fR | \fB3\fR} <\fIoffset-val\fR> {\fB12hr\fR | \fB24hr\fB}"
|
|
Set the offsets for clocks \fB2\fR or \fB3\fR and configure them in \fB12hr\fR
|
|
or \fB24hr\fR modes. \fIoffset-val\fR is in minutes from clock 1 and can range
|
|
from -1440 to +1440.
|
|
|
|
.IP "\fBraw\fR <\fIwIndex\fR> <\fIwValue\fR>"
|
|
Send a raw vendor control request to the X52 Pro.
|
|
|
|
\fBWARNING:\fR You should only use this if you know what you are doing. Sending
|
|
an invalid control sequence can potentially destroy your device.
|
|
|
|
.SH LEDs
|
|
|
|
.SS "LED IDs"
|
|
This is the list of LEDs supported by the X52 Pro.
|
|
|
|
.IP \[bu]
|
|
fire
|
|
.IP \[bu]
|
|
a
|
|
.IP \[bu]
|
|
b
|
|
.IP \[bu]
|
|
d
|
|
.IP \[bu]
|
|
e
|
|
.IP \[bu]
|
|
t1
|
|
.IP \[bu]
|
|
t2
|
|
.IP \[bu]
|
|
t3
|
|
.IP \[bu]
|
|
pov
|
|
.IP \[bu]
|
|
clutch
|
|
.IP \[bu]
|
|
throttle
|
|
|
|
.SS "LED States"
|
|
This is the list of LED states supported by the X52 Pro.
|
|
|
|
.IP \[bu]
|
|
off
|
|
.IP \[bu]
|
|
on
|
|
.IP \[bu]
|
|
red
|
|
.IP \[bu]
|
|
amber
|
|
.IP \[bu]
|
|
green
|
|
|
|
.P
|
|
Note that the \fBon\fR state is only supported by the \fBfire\fR and
|
|
\fBthrottle\fR LEDs, and they do not support the \fBred\fR, \fBamber\fR
|
|
and \fBgreen\fR states. The remaining LEDs do not support the \fBon\fR
|
|
state, but support all the other states.
|
|
|
|
.SH KNOWN ISSUES
|
|
|
|
.BR x52cli
|
|
does not maintain any state between invocations. As a result, the
|
|
\fBclock\fR command will reset the offsets for clocks 2 and 3 back to 0
|
|
in 12hr mode.
|
|
|
|
.SH PERMISSIONS
|
|
|
|
You must have write permissions to the USB device in order to use the
|
|
\fBlibx52\fR library, and by extension
|
|
.BR x52cli
|
|
|
|
The simplest method is to run
|
|
.BR x52cli
|
|
as root, preferably through
|
|
.BR sudo (8)
|
|
|
|
.SH EXAMPLES
|
|
|
|
.PD 0
|
|
\fBx52cli\fR led t1 off
|
|
.P
|
|
Turn off the T1 LED.
|
|
|
|
\fBx52cli\fR led B amber
|
|
.P
|
|
Turn the B LED to Amber
|
|
|
|
\fBx52cli\fR mfd 0 "Hello World"
|
|
.P
|
|
Set line 1 of the MFD to display "Hello World"
|
|
|
|
\fBx52cli\fR mfd 1 "$(printf '\\x9FC\\xE2mo Est\\xE0s?')"
|
|
.P
|
|
Set line 2 of the MFD to display "¿Cómo Estás?"
|
|
|