mirror of https://github.com/nirenjan/libx52.git
98 lines
3.2 KiB
Plaintext
98 lines
3.2 KiB
Plaintext
#######################################################################
|
|
# X52 Daemon Configuration
|
|
######################################################################
|
|
|
|
# The settings below are the defaults. Note that the section and key
|
|
# strings are case insensitive, but the values are not necessarily so,
|
|
# especially for those referring to paths or timezone names.
|
|
|
|
######################################################################
|
|
# Clock Settings
|
|
######################################################################
|
|
[Clock]
|
|
|
|
# Enabled controls whether the clock is enabled or not. Set this to no to
|
|
# disable the clock update. Keep in mind that if the clock was originally
|
|
# enabled on the X52, then disabling it here won't make the clock disappear on
|
|
# the MFD. You will need to unplug and reattach the X52 to make the clock
|
|
# disappear
|
|
Enabled=yes
|
|
|
|
# PrimaryIsLocal controls whether the primary clock displays local time or UTC.
|
|
# Set this to yes to display local time, no for UTC.
|
|
PrimaryIsLocal=yes
|
|
|
|
# Secondary controls the timezone of the secondary clock. Use the standard
|
|
# timezone name as defined by the Olson time database.
|
|
Secondary=UTC
|
|
|
|
# Tertiary controls the timezone of the tertiary clock. Use the standard
|
|
# timezone name as defined by the Olson time database.
|
|
Tertiary=UTC
|
|
|
|
# PrimaryFormat controls the clock format of the primary clock. This is
|
|
# either 12hr or 24hr, and can be abbreviated to 12 or 24
|
|
FormatPrimary=12hr
|
|
|
|
# SecondaryFormat controls the clock format of the secondary clock. This is
|
|
# either 12hr or 24hr, and can be abbreviated to 12 or 24
|
|
FormatSecondary=12hr
|
|
|
|
# TertiaryFormat controls the clock format of the tertiary clock. This is
|
|
# either 12hr or 24hr, and can be abbreviated to 12 or 24
|
|
FormatTertiary=12hr
|
|
|
|
# DateFormat controls the format of the date display. This can be one of
|
|
# ddmmyy, mmddyy or yymmdd. Alternate representations of these are
|
|
# dd-mm-yy, mm-dd-yy or yy-mm-dd respectively.
|
|
DateFormat=ddmmyy
|
|
|
|
######################################################################
|
|
# LED Settings - only applicable to X52Pro
|
|
######################################################################
|
|
[LED]
|
|
|
|
# The LED settings map a color code or state to the corresponding LED.
|
|
Fire=on
|
|
Throttle=on
|
|
A=green
|
|
B=green
|
|
D=green
|
|
E=green
|
|
T1=green
|
|
T2=green
|
|
T3=green
|
|
POV=green
|
|
Clutch=green
|
|
|
|
######################################################################
|
|
# Brightness Settings
|
|
######################################################################
|
|
[Brightness]
|
|
|
|
# The brightness settings map the brightness value to the LEDs/MFD.
|
|
MFD=128
|
|
LED=128
|
|
|
|
######################################################################
|
|
# Profiles - only valid on Linux
|
|
######################################################################
|
|
[Profiles]
|
|
|
|
# Directory is the location of the folder containing the individual profiles.
|
|
Directory=/etc/x52d/profiles.d
|
|
|
|
# ClutchEnabled determines if the clutch button is treated specially
|
|
ClutchEnabled=no
|
|
|
|
# ClutchLatched controls if the clutch button (if enabled) is a latched button
|
|
# (press once to enter clutch mode, press again to exit clutch mode), or must
|
|
# be held down to remain in clutch mode.
|
|
ClutchLatched=no
|
|
|
|
##################
|
|
#X52 Input Servic#
|
|
#Version 0.2.2 #
|
|
#OS: Linux #
|
|
##################
|